| CODE | PRODUCT | DETAILS | IMAGE |
|---|---|---|---|
| SINK1 | SS SINGLE SINK UNIT WITH SPLASH-BACK |
Dimensions: 600x600x850+150mm. Inches: 24x24x34+6″ Bowl Size: 17.5x16x9.5”(deep) With Splash-back. SS Thickness: 16 & 18swg. |
 |
| SINK WT | SS WORK TABLE WITH SINK WITH SPLASH-BACK |
Dimensions: 1200x600x850+150mm. Inches: 48x24x34+6″ Bowl Size: 19.5x16x9.5”(deep) Bowl on RHS & LHS both available. With Splash-back. SS Thickness: 16 & 18swg. |
 |
| SINK2 | SS TWO SINK UNIT WITH SPLASH-BACK |
Dimensions: 1200x600x850+150mm.Inches: 48x24x34+6″ Bowl Size: 19.5x16x9.5”(deep) With Splash-back. SS Thickness: 16 & 18swg. |
 |
| SINK3 | SS THREE SINK UNIT WITH SPLASH-BACK |
Dimensions: 1800x600x850+150mm. Inches: 72x24x34+6″ Bowl Size: 19.5x16x9.5”(deep) With Splash-back. SS Thickness: 16 & 18swg. |
 |
| SINK POT |
SS POT SINK WITH SPLASH-BACK |
Dimensions: 1000x700x850+150mm.Inches: 40x28x34+6″ Bowl Size: 34x20x8”(deep) With Splash-back. SS Thickness: 16 & 18swg. |
 |
| SINK WALL 450 |
WALL MOUNTED SINK PUSH TYPE |
Dimensions: 450x450x240+35mm.Inches: 18x18x1.5″ Push type operating for convenience. SS Thickness: 16 & 18swg. |
 |
| GT01GT02
GT03 |
SS GREASE TRAP The purpose of a grease trap is to reduce the amount of fats, oils and greases to enter the main sewers & avoid blockages, foul odours and pest infestation due to it. |
Dimensions: 400x250x240mm. Inches:16x10x10” Single Inlet Hole. Dimensions: 500x300x290mm. Dimensions: 600x410x310mm. |
 |
| WSPIPE 600
WSPIPE 900 WSPIPE 1200 |
WALL SHELF FOR ABOVE SINK |
Dimensions: 600x300mm. Inches: 24×12” Dimensions: 900x300mm. Dimensions: 1200x300mm. |
 |
| DCS | DRAIN COVER STANDARD |
Dimensions: 580x195x30mm Inches: 22.8 x 7.7×1” SS Thickness: 1.2mm |
 |